![]() Power cord to the AC inlet on the back of the player, then connect the plug to a standard wall outlet or to the auxiliary power outlet of your amplifier. ![]() ÷ After completing all other connections, connect the accessory The front panel PHONES jack can be used to connect headphones with a Ø6.3 mm stereo phone plug. PHONO/LINE switch Note: Set switch to except when using an analog turntableĮlectronic instrument, CD player, etc. If the unit’s STEREO/MONO switch is set to, the master output will be a monaural combination of L+R channels.Īlways turn off the power switch and disconnect the power plug from its outlet when making or changing connections. This unit is furnished with MASTER OUT 1 and MASTER OUT 2 output systems, both of which support the use of RCA plugs. Then set the MIC/AUX switch to (this connection requires the use of Ø6.3 mm phone plugs). PIONEER DJ 0 comentarios 113,35 con IVA Referencia POT054 Cantidad Al carrito Disponible bajo pedido, aproximadamente 8-10 días Click aquí para recibir un email cuando tengamos stock nuevamente Placa canal 1 y 2 de mesa de mezclas Pioneer DJM-400. Posiada wbudowan cyfrow szyn miksujc (24bit/96kHz). Connect the component’s L channel to MIC1 (AUX(L)) jack and the R channel to the MIC2 (AUX(R)) jack. PLACA POTENCIÓMETROS DESLIZANTES DJM-400. DJM-400 to nowa propozycja firmy Pioneer na rynek mikserw mikserw djskich do zastosowa domowych. The MIC1 and MIC2 jacks can also be used together as a pair of stereo line input connectors to connect a component equipped with line level output connectors. The MIC1 and MIC2 jacks can be used to connect microphones with Ø6.3 mm phone plugs. Then set the corresponding channel’s PHONO/ LINE switch to, and the input selector switch to. ![]() To use a cassette deck or other CD player, connect the component’s audio output connectors to one of the channel 1 to 2 PHONO/LINE input connectors. De DJM-400 mag dan de kleinste mixer uit het Pioneer-assortiment zijn (waardoor hij perfect draagbaar is), maar hij levert ook grootse prestaties en biedt. Connect the turntable’s ground wire to the DJM-400’s SIGNAL GND terminal.Ĭonnecting other devices with line level output The DJM- 400’s PHONO inputs support MM cartridges. Description Pioneers newest entry-level mixer with an all-digital mixing bus (24bit/96kHz) featuring 7 onboard effects, including the all new In-Loop Sampler The DJM-400 matches Pioneer’s CDJ-200 CD turntable in both function and design, allowing DJs to expand the range of DJing and remixing. Pioneer DJM-400 replacement spare part headphone connector for dj audio mixers Pioneer djm400. PIONEER DJM-400 REPLACEMENT HEADPHONE CONNECTOR. Set the corresponding channel’s PHONO/LINE switch to, and set the channel’s input selector switch to. Pioneer DJM 400 replacement phono jack 4 rca connector for pcb audio input phono/line/cd for dj mixe. To connect an analog turntable, connect the turntable’s audio output cable to one of the channel 1 to 2 PHONO/LINE input connectors. Set the connected channel’s input selector switch to. Connect a DJ CD player’s audio output connectors to one of the channel 1 to 2 CD input connectors, and connect the player’s control cable to the corresponding channel’s CONTROL connector.
0 Comments
Leave a Reply. |